TECNO-3 PUSH FLEX
The Tecno-3 Push Flex completelyeliminates the pressure zone on the instep and significantly improves thefeeling of closure. Equipped with a smaller support surface on the tongueof the shoe, with a central flexing system, it manages to accompany the differentneeds and conformations of various cyclists, without creating areas of hyperpressure. It guarantees micrometric adjustment, tension closing / releasespeed and is replaceable.
REFLEX ADJUSTABLE HEEL
RETENTION DEVICE
The ADJUSTABLE HEEL RETENTION DEVICEreinforces the top of the heel cup and improves the fit by closing the back ofthe shoe securely around the rider’s heel. The heel retention device tightensthe top of the heel cup so that the heel doesn’t slide out during steep climbsor sprints. Each side of the heel can be adjusted independently, for a perfectfit. For a custom adjustment turn the screw towards the + sign to tighten theheel retention device and towards the – sign to open it. Light weight, easy touse, and replaceable. · For additional security while pedaling, the newadjustable heel device is provided with reflex inserts for more visibility indark conditions.
SIDI INTEGRATED HEEL CUP
An all new design and light,reinforced to avoid deformation after prolonged efforts and pressures. Anatomicallyshaped, it stabilizes and supports the foot when pedalling.The reflective inserts on the heel provide greatersafety to the athlete on the road, helping to signal the presence of thecyclist in conditions of poor visibility.
RUBBER TOE
Upper part of the toe section is rubberisedto resist and deflect impacts from stones or debris when cycling. It is madewith anti-slip rubber.
MTB SRS CARBON-GROUND
SOLE
The MTB SRS CARBON-GROUND SOLE raises thestandard for mountain bike performance, dropping off about 100 grams per paircompared to the previous Dragon Carbon SRS sole without sacrificing power ordurability. The MTB SRS CARBON-GROUND Sole consists of replaceable tread blocksin the toe and heel attached to a medium-modulus carbon sole, plus theinnovative Replaceable MTB Plate, designed to prevent sole damage from pedalcontact
MTB SRS CARBON-GROUND
SOLE
Most Dual-Retention Bar type MTB Pedals(such as Crankbrothers and LOOK) recommend using a reinforcement plate betweenthe cleat and the shoe in order to prevent cracking or denting the sole. TheMTB Plate can be replaced in case of damage from the pedal system, so addingthe weight of an aftermarket reinforcement plate is optional. The Ground SRStreads and MTB Plate are easily removable and replaceable. The MTB SRSCARBON-GROUND Sole is toe-spike compatible.
Key Features:
Microfibre TechPro and Mesh upper
Comfort-Fit Insole proved for lightweight support
Handmade MTB SRS Carbon-Ground carbon fibre sole
Replaceable heel and toe tread blocks and replaceable cleat plate
Double Tecno-3 Push Flex rotor closing system
Rubber toe for protection
All-new integrated heel with adjustable retention device
