Darimo 輕量化解決方案，可滿足您的公路一體車把需求。更寬更長更多角度組合。
角度：6° (將推出12° 和 17),
寬度：360mm-440mm
長度：70mm-130mm
飾面：UD 或 3K
重量：90x420mm：194克、130x440mm：210 克
𝟭𝟬𝟬%在西班牙製造
Some of the currently lightest carbon partsfor XC bikes and racing bikes have been springing from the Darimo carbon forge,which is located in beautiful Valencia on the east coast of Spain.
With the Nexum stem-handlebar unit, DarimoCarbon has once again raised the bar a bit. The Nexum stem-handlebar unitweighs 196g (420 mm / 110 mm / -6 °) less than most racing bike handlebarswithout a stem. Thanks to the many widths and stem lengths, everyone will findthe right setup for themselves. Screws made of titanium and barrel nuts made ofaluminum help to save further weight and ensure reliable clamping on yoursteerer tube.
The stem-handlebar unit is available infour different finishes (UD glossy or matt, 3k glossy or matt) and in handlebarwidths of 360 mm, 380 mm, 400 mm, 420 mm or 440 mm, measured from center tocenter. The stem length is 70 mm - 130 mm in 10 mm steps to choose from and the-6 ° stem angle allows you to sit in a sporty position. All bar widths offeredhave a compact reach of 77 mm and 128 mm drop. The flattened upper part ensurescomfort when the tour or the race takes a little longer. On the undersidelaminated guides for brake and gear cables help you to assemble everythingperfectly.
The stem may be clamped to the steerer tubewith a maximum of 3.5 Nm. A torque of up to 4 Nm is permitted in the clampingarea of the shift / brake lever. Please feel for the torque required for securefastening and do not exceed the maximum values. We recommend using a highquality carbon paste during assembly. Below the handlebars, two M5 threadedsockets are laminated 29 mm apart. At this point you can securely attach acomputer holder or similar accessory.
In order to achieve the sensational weightsof 196g (420 mm / 110 mm / -6 °), to pass the standard ISO 4210-2 test and tobe able to release the components up to 90 kg system weight, Darimo Carbon usesa specially developed process of lamination. The layer structure is optimallyadapted to the handlebar width and stem length.
NOTE: The instructions for the product mustbe followed! Torques must be strictly adhered to. If the necessary specialistknowledge or tools for the correct installation of the are missing, theinstallation must be carried out by a specialist workshop with the appropriateknowledge.
TECHNICAL SPECIFICATIONS:
intended use : racing bike
Material: carbon
Stem lengths: 70, 80, 90, 100, 110, 120 or130 mm
Stem angle: -6 °
Clamp height: 43 mm
max.torque on steerer tube: 3.5 Nm
Handlebar width: 360 mm, 380 mm, 400 mm,420 mm, 440 mm (measured center - center)
Reach: 77 mm
Drop: 128 mm
Rise: 0 mm
Backsweep: 0 °
Upsweep: 0 °
System weight: max. 90 kg (driver includingclothing and luggage)
Color / Finish: 3K glossy | Decals black
Weight according to the manufacturer: from190g
Weight weighed: 196g (420 mm / 110 mm / -6°)
Product weight:196 g
Manufacturers:Darimo Carbon Fiber
