ROAD AND GRAVEL SEALANT
The milKit road and gravel sealant ensures longer-lasting function and better sealing results at high pressures.
Enhanced performance: The innovative formula ensures that the tire sealant remains liquid for a longer period, keeping it functional for an extended duration.
Reliable: New particle composition improves the sealing performance, especially at high pressures.
Homogeneous: When used correctly, the benefits of homogeneity are preserved
MICROFIBERS AND SYNTHETIC LATEX MAKE AN AWARD WINNING PRODUCT
milKit sealant coats the tire more evenly for effective sealing of punctures and long lasting results
Seals tears and holes up to 6mm
Stays homogenous – no need to shake it up
Lasts for years in the bottle
Synthetic latex means no ammonia or chemically aggressive ingredients, so no horrible smell or damage to rims and tires.
Non-allergenic, non-hazardous & washable
Works from -20 to +50° C / -4 – 122° F
CO2 compatible
Works well at high pressure so is suitable for gravel and road tires and well as MTB
HOW TO USE MILKIT SEALANT
milKit tubeless sealant is designed for best results with the patented milKit tubeless valves and award winning booster for inflating tubeless tires. However, it can be used with any tubeless valves.
Germany’s Mountainbike magazine recognized milKit’s impeccable sealing and ease of use by voting it the best tubeless sealant in December 2020.
Using the milKit syringe you can easily measure how much sealant is left in your tire and add quickly and cleanly as needed.
Screw out the milKit valve core – the rubber flaps ensure no air is lost
Ensure tire pressure is not above 22 psi
Extract old sealant from tire with the milKit syringe to measure sealant remaining amount and check quality
Measure out the correct amount of milKit sealant and inject using the syringe
Screw the valve core back in, inflate tire to full riding pressure and you’re ready to ride!
milKit sealant is thicker than others and always stays a consistent homogenous liquid. There is no need to shake it before use.
milKit sealant’s microfibers give it a strong puncture sealing capability, with results for tears of up to 6mm. It covers the inside of the tire evenly, and adheres better to the tire wall than thin latex products, so the all-important microfibers are distributed optimally and ready to act as soon as you puncture.
In the tire, the milKit sealant does not decompose into rubber particles and an aqueous residue, but it dries evenly and slowly and therefore remains effective longer than comparable products.
milKit’s more environmentally friendly synthetic latex means there is no ammonia or chemically aggressive ingredients in this product. As well as being kinder on the environment this means no horrible smell or damage to rims and tires. It is also non allergenic, non-hazardous, can be diluted with water if desired and it is washable.
The sealing effect of the microfibers also works very well at high pressure, making the sealant ideal for use in road and gravel tubeless tires.
WHAT AMOUNT OF SEALANT DO I HAVE TO FILL INTO MY TIRE?
MiKit recommend starting with the following amounts and then optimize the right sealant level from there:
Road / gravel 40-80 ml / 1.4-2.7 oz
26” MTB 60-80 ml / 2-2.7 oz
27.5” MTB 80-100 ml / 2.7-3.4 oz
29” MTB 100-120 ml / 3.4-4 oz
